SELLEYS Wet Area Speed Seal Silicone 300g

「Product」：Wet Area Speed Seal Silicone 300g

「Brand」：SELLEYS

「Unit」：

「Packing」：

「Colour」：White

「Contents」：

• Super fast cure and stiff consistency provide a waterproof seal to allow shower use 1 hour after application*.
• Cured sealant is guaranteed to resist growth of unsightly mould and mildew for 5 years^
• 25year quality guarantee: remain flexible – will not shrink, crack, crumble or dry out
• Superior adhesion to mortar, grout and metals. The product does not lift at the edges and adheres so well to cement and grout that dirt, mould and fungus will not become trapped in the silicone, thereby keeping those unsightly black mould spots away.
• Superior silicone formulation forms a durable seal which locks out water and which does not shrink when drying.
• Non corrosive neutral cure formula.
• Low odour so can be used in any environment without discomfort.
• Easy to clean once it is applied, as it resists moisture, hot cooking oils and steam.
• Superior flexibility +/- 25% movement capability & up to 400% elongation or stretch.
• Temperature resistance – approximately -60°c +150°c
• Quality reinforced with a 25 year guarantee – when used as directed, i.e. For private use and within 12 months of purchase, the product is guaranteed against crumbling, cracking or drying.

Sealant will have a firm skin and will be waterproof and shower ready 1 hour after application in showers. The semi-cured sealant must not be touched until fully cured (48 hours).

^Sealant must be cleaned regularly to avoid build-up of soap scum. Manufacturer’s liability is limited to refund or replacement of product.

What materials is this product suitable for?

• Ceramic, glazed and porcelain fixtures
• Metal, copper and brass fittings
• Powder coated Aluminium/ Aluminium
• Plastic laminates
• Rubber
• Glass
• Stainless Steel
• Concrete and Grouts
• Not for use on polyethylene, polypropylene or Teflon. Pre-test plastics before use
• Can not be painted over
• Not suitable for building materials that bleed oils or solvents, such as impregnated wood

How to use this product

• Clean and dry surface with Mineral Turpentine. Allow to dry completely before applying silicone. If there old silicone which needs to be removed, we recommend using SELLEYSSILICONE REMOVER, this ingenous product makes removing old silicone easy.
• Cut the seal at the top of the cartridge and cut the nozzle at a 45° angle, to the size of the gap opening. Fit the nozzle to the top of the cartridge. Insert the cartridge into a caulking gun.
• Hold the caulking gun at a 45° angle. Press the nozzle opening against the joint, apply steady pressure to the caulking gun and extrude the silicone sealant forcing the sealant into the gap and move in a pushing motion, along the joint in one smooth action. *Note: Product will skin over in 5 MINUTES – for a large job, break up into sections.
• For a smooth finish, tool with a spatula, such as a 50mm Soft Grip Scraper within 5 minutes of application. For best finish dip spatula in detergent. Alternatively you can smooth with a finger dipped in mineral turpentine.
• Excess sealant must be cleaned up before the sealant skins in 5 minutes. Wipe excess away with a cloth dampened in mineral turpentine. Clean tools immediately in mineral turpetine. If you have used tape, remove tape before the sealant skins.
• Sealant will have a firm skin and will be waterproof and shower ready 1 hour after application in showers. The semi-cured sealant must not be touched until fully cured (48 hours).

Storage and re-use

• Store in cool dry conditions, below 30°C
• The sealant should be used within 6 months after opening.
• After use keep the nozzle on the cartridge
• Silicone is a reactive product and is designed to cure once exposed to humidity. While the product may be stored for a few months once opened, it does have a limited shelf life. Storage in an upright position in a cool dry place is recommended to maximise the storage life.
• If the sealant is going to be used again within a few days, leave the nozzle on and merely extrude approximately 2 cm of product before storing the cartridge upright. This will cure to a plug which can easily be pulled out when required.
• For longer storage periods, leave the nozzle on and place a piece of plasticene or Blu Tack over the end of the nozzle. Tightly tape a piece of aluminium foil over the whole nozzle to exclude any air.
• When you want to re-use the product, simply take off the foil and plug from the old nozzle pull out the excess silicone from the nozzle with a corkscrew, then re-pierce any cure at the tip of the cartridge and re-use.
• If cure has taken place into the cartridge, the product is unlikely to be in a useable state and should be discarded.

Safety tips

• Uncured product may irritate eyes. If in eyes, flood the eyes for at least 15 minutes and seek medical advice.
• Avoid contact with skin, if contact occurs, wipe off immediately and wash with detergent. It may irritate sensitive skin.
• Avoid breathing in vapours.
• Ensure you use a well ventilated area as product releases methyl ethyl ketoxime while curing.
• Keep away from children.

(The actual price is subject to the salesperson’s quotation)